supercomputers

IBM to send blazing fast supercomputer to Energy Dept.

IBM
to send blazing fast supercomputer to Energy Dept.
This story has been
edited since it was published. See below for details.
IBM plans to announce
on Tuesday that it will supply the world's fastest supercomputer to the U.S.
Department of Energy in the next few years, according to numerous reports.
Not only will the machine, called Sequoia, be the fastest supercomputer to
date, it will blow the current record-holder out of the water. IBM's Roadrunner,
located at the U.S. Department of Energy's Los Alamos National Laboratory, was
the first system to reach 1.026 petaflops (a petaflop is equal to a quadrillion
calculations per second; the "flops" stands for floating point operations per
second). But only seven months after the Roadrunner took top honors on a twice-yearly list of the world's fastest
supercomputers, IBM is announcing that its successor will outdo it by an order
of magnitude. Sequoia will be able to work at a staggering 20 petaflops, the
equivalent of the computing power of 2 million laptops according
to Reuters.
IBM says it plans to deliver the Sequoia to the Energy
Department for use at the Lawrence Livermore National Laboratory. The
supercomputer will run simulations to test the soundness of the nation's
stockpile of nuclear weaponry, according to the IDG News
Service.

Editor's note: When it was initially published, this story
cited data from another publication about Sequoia's energy usage. Several
readers doubted the validity of the data, and I have not been able to confirm
the figures. For now, that information has been removed.
''alıntı''

KOBOLD

Control Devices and Relays

What is innovative about KOBUS? In contrast to conventional systems (such as current loop 4 - 20 mA), only a single 2-pole cable is laid, to which up to 240 sensors can be attached. In order to get the same effect with 4 - 20 mA, 240 cables would have to be laid. Obviously, the KOBUS system has a giant advantage just in wiring alone. In addition, it is advantageous that the sensor modules (initially for temperature, moisture, voltage, and current) developed by us are priced comparably to the 4 - 20 mA transducers, which means that there are also no additional expenses - as with other expensive bus systems - for the user.





Data protection on the KOBOLD website
Wewould like to inform you of which information we gather, how we useyour data and how we handle it. We consider the protection of this personal data to be very important.
We gather personal data from ourcontact form for ordering catalogues. We only use the data you providein handling your catalogue order, answering queries and processing orders. We of course also use this data for updating our address list.
Withthe exception of other KOBOLD enterprises, we will neither sell thisdata to third parties nor market it in any other way. We thus only useyour data for direct co-operation purposes and to notify you of our new products and solutions.
If you have any questions about this topicyou can also use our contact form at Order Catalogue. We will then contact you straight away.
As we further develop our pages and theInternet we will of course also continue to update this information,and publish any changes. You can therefore keep yourself regularlyupdated on our Data Protection page.

Yours sincerely
KOBOLD Messring GmbH

PEI-Genesis Offers ITT VEAM Rail-Industry Connectors with 48-hour Assembly Service

PEI-Genesis Offers ITT VEAM Rail-Industry Connectors with 48-hour Assembly Service (Formerly Litton Connectors)

VEAM connectors (formerly Litton-Veam) assembled in 48 hours.
PEI-Genesis is the world largest distributor of ITT’s VEAM CIR and VEAM FR CIR (fire retardant) connector series of multipin circular connectors. Now engineers and buyers in the rail sector obtain the exact connector for their requirement in the shortest possible time and without the burden of minimum order quantities; PEI-Genesis will happily build just one connector if that is all you need

VEAM CIR Series Connectors
The basic design parameters of the VEAM CIR series were derived from the MIL-C-5015 military specification and enhanced by the addition of a positive-lock/quick-disconnect bayonet coupling mechanism. High shock and vibration resistance is achieved without the need for lock wires, and the connectors are rated for a minimum of 2000 couplings. VEAM CIR connectors are available in an enormous range of styles, shell sizes and contact arrangements and can be supplied in a wide variety of materials and finishes to suit the demands of each particular application. It’s also intermateable with VG95234.

Add-ons for Veam Cir Connectors
ITT Cannon’s VEAM CIR connectors can also be specified with various inserts to meet low-smoke/zero-halogen requirements and provide superior resistance to fuel oils, solvents and elevated temperatures. For more details, call PEI-Genesis and talk to one of our applications engineers.

To check our inventory, input a part number in the bar above.

To order a VEAM CIR Catalog, click here.

View specifications from the PEI-Genesis ITT Cannon VEAM CIR Catalog

PROMAX OD-576

60 MHz, 25 Gsamples/s Digital Storage Oscilloscope
Bandwidth:
o

60 MHz
*

Sample Rate:
o

25 GS/s channel
*

Record Length:
o

125 k/CH
*

Trigger:
o

Pulse Width, TV Line, Event Delay, Time Delay
*

WAV. Signal Process:
o

CH1+CH2, CH1-CH2, FFT, Go/NoGo
*

Interfaces:
o

USB, Printer Port, RS-232C, Go/NoGo Output, GPIB (optional)


The OD-576 60 MHz bandwidth with a Mono LCD display, are designed and built to meet the demands of a modern DSO in the main stream market today. The Unmatched performance, valued plus features, user-friendly design and versatile interface make OD-570 series a very useful equipment for most of the applications in circuit design, production test, repair service and education lab. With almost everything you could expect from a DSO, OD-570 series provides you the best solution for waveform measurement at a surprisingly affordable price

PROMAX OD-576

60 MHz, 25 Gsamples/s Digital Storage Oscilloscope
Bandwidth:
o

60 MHz
*

Sample Rate:
o

25 GS/s channel
*

Record Length:
o

125 k/CH
*

Trigger:
o

Pulse Width, TV Line, Event Delay, Time Delay
*

WAV. Signal Process:
o

CH1+CH2, CH1-CH2, FFT, Go/NoGo
*

Interfaces:
o

USB, Printer Port, RS-232C, Go/NoGo Output, GPIB (optional)


The OD-576 60 MHz bandwidth with a Mono LCD display, are designed and built to meet the demands of a modern DSO in the main stream market today. The Unmatched performance, valued plus features, user-friendly design and versatile interface make OD-570 series a very useful equipment for most of the applications in circuit design, production test, repair service and education lab. With almost everything you could expect from a DSO, OD-570 series provides you the best solution for waveform measurement at a surprisingly affordable price

COLLİNS

PLEASE NOTE:

We
have attempted to offer the most voluminous and encompassing Internet site for
avionics information and products. Because there are literally thousands of
avionics products utilized in the general, corporate, regional, and air
transport aviation industries, detailed information may not be available for
each and every product referenced on www.seaerospace.com. Therefore, if you
require additional information for an avionics product that appears on our
Internet site, please utilize the RFQ function of our site or e-mail us for an
immediate
response.

http://www.seaerospace.com/

Add Scanning Capabilites to Your Huntron Tracker Model 30 System

Adding a
Huntron^® Scanner to your Tracker Model 30 system
lets you access components using standard DIP clips and cables, custom cables to
PCB connectors or interface to a bed-of-nails.
You can compare one component
with another in real-time (64 pins max.) or use your PC to automate testing and
scan up to 128 pins.
Huntron Scanners can be used with a Huntron Access
Prober to provide Common line connections while the Prober is probing a PCB.
This method gives you up to 128 selectable Commons to use. For example, you can
connect the Scanner to a connector on a PCB mounted in the Prober using a common
ribbon style cable. While the Prober is probing, any one of the lines on the
connected ribbon cable can be selected as the Common reference. This would
provide you true point-to-point testing capabilities.
Note: The
ProTrack Scanner will be replaced by the Scanner II and/or the Scanner 31S
effective 1/1/2008. This applies to commercial sales
only.


Scanner
II and Scaner 31S users may want to consider these Optional Accessories to enhance
their test capabilities.

Highlights:Desing
By kuzey....

• The Scanner II and Scanner 31S accessories add scanning capability
  to the Tracker Model 30
• All Scanners have a minimum 64 pin capability
• The Scanner II can scan up to 128 pins when the A and B channels
  are combined
• The Scanner 31S use standard IDC style connectors
• The Scanner II uses the common SCSI-2 (68 pin) style connectors
• Up to 8 Scanner IIs can be “daisy-chained” to increase the
  available number of test pins

Selecting Accessories for your Scanner
II
The Scanner II accessories for interfacing to your printed circuit
board come "ala carte". This means that you select the accessories you want
included with your Scanner. Choose from SMT or through-hole style DIP clip and
cable kits (Scanner Adapter required with Scanner II) or a mutli-pin breakout
cable. Details on these accessories are provided on this
page

cooling tunnel

Process-related facility systems

Process-related facility systems often call for customized system solutions since different products need different conditions of manufacture and storage. That's why caverion provides not only standard system solutions but also custom-made ones, because the most suitable solution cannot be ready-made!

Whether your production or activity requires particular ambient conditions or a super-clean working environment, or it has to comply with safety or environmental regulations – we look for the best solution together with you. Benefit from our know-ho

FCI

You can count on FCI, as a leader in flex circuit connectors, for the most innovative and complete range of products in the industry. FCI offers products in LIF (low insertion force) and ZIF (zero insertion force), top and bottom contact options, vertical and right angle orientations, surface mount and through hole terminations in contact spacing options all the way down to 0.3mm with finer pitch products on their way. Additional features, such as optional cable locks and additional mounting devices, insure that FCI has a solution for almost any application, no matter how demanding.

As your connection to innovation, FCI continues to bring you unique solutions that not only give you the footprint you need but help to maximize the quality level of your application. Many of our flex circuit connectors offer ZIF with prehold, which applies a small retention force on the cable to hold it in place until the actuator is locked. FCI introduced the first flex connector with a back side flip actuator that allows the user to insert the flex cable and lock the actuator with one hand. FCI improved that feature on many products by modifying the connector housing to provide visual confirmation that the flex cable is mated properly. FCI was also the company that first brought you the option of an FFC/FPC connector under 1mm in height. These features combine to insure your application has the highest quality possible when it leaves your site.

FCI

You can count on FCI, as a leader in flex circuit connectors, for the most innovative and complete range of products in the industry. FCI offers products in LIF (low insertion force) and ZIF (zero insertion force), top and bottom contact options, vertical and right angle orientations, surface mount and through hole terminations in contact spacing options all the way down to 0.3mm with finer pitch products on their way. Additional features, such as optional cable locks and additional mounting devices, insure that FCI has a solution for almost any application, no matter how demanding.

As your connection to innovation, FCI continues to bring you unique solutions that not only give you the footprint you need but help to maximize the quality level of your application. Many of our flex circuit connectors offer ZIF with prehold, which applies a small retention force on the cable to hold it in place until the actuator is locked. FCI introduced the first flex connector with a back side flip actuator that allows the user to insert the flex cable and lock the actuator with one hand. FCI improved that feature on many products by modifying the connector housing to provide visual confirmation that the flex cable is mated properly. FCI was also the company that first brought you the option of an FFC/FPC connector under 1mm in height. These features combine to insure your application has the highest quality possible when it leaves your site.

Company Profile

fallow me blog....


Bronkhorst High-Tech B.V., established in 1981, offers the most extensive product range of thermal mass flow meters and controllers on the market. Numerous styles of both standard and bespoke instruments can be offered for applications in laboratory, industrial and hazardous areas.
The full scale measuring range (with 50:1 turn-down) for these instruments can be selected between 0-1 ml_n/min and 0-10000 m³_n/h for gases and 0-30 mg/h up to 0-20 kg/h for liquids. Furthermore Bronkhorst High-Tech offers pressure transducers and controllers with a minimum range of 0-100 mbar and a maximum range of 0-400 bar. Bronkhorst's Coriolis Mass Flow Meters/Controllers for gases and liquids have a measurement capability between 20 g/h and 600 kg/h. The most recent development is a series of ultra-compact, chip-sensor based instruments for gas flow and pressure measurement and control.

Global marketing and support

Bronkhorst High-Tech is a truly world-wide organisation with its Headquarters being located in the town of Ruurlo in The Netherlands. With a total (worldwide) head-count now exceeding 330 employees, it is impressive that 45 of these are involved with R&D, 120 in manufacture and 40 involved with after-sales service and customer care. In actual fact, the Customer Service Department offers
"round-the-clock" support, seven days a week, to customers in every corner of the world.

Bronkhorst High-Tech Headquarters, Ruurlo, The Netherlands. In 2006, when this picture was taken for the celebration of Bronkhorst's 25th anniversary, 200 people were employed at this location. The total head-count including subsidiary offices now exceeds 330 employees.

In addition to the sales office in Veenendaal of The Netherlands there are subsidiary offices in Great Britain, France, Switzerland, northern Germany, the USA and China, whereby local expertise and service is offered. Bronkhorst High-Tech has also built up an extensive complementary network of distributors and service stations across the rest of Europe and, indeed, yet further representation in such countries as Japan, Australia, New Zealand, Canada, Israel, India, South Africa, Brazil and Korea.

Quality

Customer satisfaction, innovation and quality of product and service have been the cornerstones of Bronkhorst High-Tech's success. In 1987 the company obtained the Koning Willem I Award for a young successful enterprise and in 1992 the company was accredited to ISO 9001 with ISO 14001 (International Standard for environmental management) following three years later. In January 2004 this ongoing commitment was rewarded by accreditation to the most recent Quality Management System, ISO 9001:2000.

cooling tunnel

Process-related facility systems

Process-related facility systems often call for customized system solutions since different products need different conditions of manufacture and storage. That's why caverion provides not only standard system solutions but also custom-made ones, because the most suitable solution cannot be ready-made!

Whether your production or activity requires particular ambient conditions or a super-clean working environment, or it has to comply with safety or environmental regulations – we look for the best solution together with you. Benefit from our know-how

Control Devices and Relays

What is innovative about KOBUS? In contrast to conventional systems (such as current loop 4 - 20 mA), only a single 2-pole cable is laid, to which up to 240 sensors can be attached. In order to get the same effect with 4 - 20 mA, 240 cables would have to be laid. Obviously, the KOBUS system has a giant advantage just in wiring alone. In addition, it is advantageous that the sensor modules (initially for temperature, moisture, voltage, and current) developed by us are priced comparably to the 4 - 20 mA transducers, which means that there are also no additional expenses - as with other expensive bus systems - for the user.





Data protection on the KOBOLD website
Wewould like to inform you of which information we gather, how we useyour data and how we handle it. We consider the protection of this personal data to be very important.
We gather personal data from ourcontact form for ordering catalogues. We only use the data you providein handling your catalogue order, answering queries and processing orders. We of course also use this data for updating our address list.
Withthe exception of other KOBOLD enterprises, we will neither sell thisdata to third parties nor market it in any other way. We thus only useyour data for direct co-operation purposes and to notify you of our new products and solutions.
If you have any questions about this topicyou can also use our contact form at Order Catalogue. We will then contact you straight away.
As we further develop our pages and theInternet we will of course also continue to update this information,and publish any changes. You can therefore keep yourself regularlyupdated on our Data Protection page.

Yours sincerely
KOBOLD Messring GmbH

Recover, Repair, Recycle

Benefit from Huntron's 30 years of providing quality Diagnostic Tools for PCA Recovery
With today's val
id concerns for protection of our environment, the recovery, repair and recycling of printed circuit assemblies (PCAs) is a positive move towards sustainable environmental-friendly practices.
Huntron has been helping businesses troubleshoot and repair printed circuit assemblies for over 30 years. Repairing rather than discarding failed PCAs keeps the potentially harmful chemical components such as lead out of our world's landfills and disposal sites.
Below is a list of Huntron products to help you recover, repair and recycle PCAs:
• Huntron Tracker 2800
• Huntron Tracker Model 30
• Huntron TrackerPXI
• NFSA RF Prober
New Version of Huntron Workstation Available!
A new version of Huntron Workstation is now available for download. Go to the Workstation Support web page to download version 4.1.3273! Update December 22, 2008.
New Automated Near Field Signature Analysis
Combining the Huntron Access Robotic Probing Station, Huntron Workstation Software and the new Test Evolution (TEV) Non-Contact RF Near Field Probe with local synthetic measurement technology sets the standard for Near Field Signature Analysis (NFSA).
Placing the sensor, receiver and signal processing in one compact RF Probe assembly allows the sensing of EM fields emanating from RF circuitry. A specific position in a Near Field is defined as a Virtual Test Point™ (VTP) where a NFSA measurement is made. Identical circuits emanate nearly identical fields at the VTP. The combination of Huntron Prober and TEV RF Probe allows accurate positioning and measurement of VTPs. This provides the repeatability to measure VTP's from 200MHZ to 3GHZ on RF assemblies.
When used for test, an engineer examines the UUT schematic with an eye toward following the RF signal path. Using Huntron Workstation Software, points along that path are selected for Virtual Test Points (VTP). A set of known good boards are then scanned making and saving Near Field signatures at the VTP's. Unknown UUT's are scanned with the same VTP's against the saved signatures. Any deviation against stored signatures indicates areas of concern.
Near Field Signature Analysis (NFSA) is close proximity sensing of EM fields emanating from RF circuitry. Near Fields are close to active circuits with the strength dependent on power and circuit design. AC circuits radiate a unique frequency and magnitude “signature” being a function of frequency of operation, magnitude, distance to the test probe and geometric location of the probe.
The RF NFSA Prober will be available from Huntron to USA customers only in early 2009. Contact Huntron for more details on Near Field Signature Analysis.
Download the latest NFSA RF Prober brochure now!
Huntron Access USB Probers
The NEW Huntron Access USB Probers are the latest versions of the popular robotic probers used to automate testing of complex printed circuit boards. The Access USB Probers come in two sizes - the Access USB Prober can handle PCBs up to 19.4” by 14” and the larger Access 2 USB Prober can hold PCBs up to 22” by 23” in size. The new Probers come with a USB Probe Tip camera to monitor the probe placement as the test progresses. Both Probers uses linear encoders for incredible 20 micron accuracy. The new Access USB Probers can also be ordered with the Tracker Model 30 embedded inside the chassis for a space saving, all-in-one platform.
Download the latest Diagnostic Systems brochure now!
Huntron's flexible, automated diagnostic solutions help people solve circuit card problems.

Huntron was founded in 1976 with the introduction of the Huntron Tracker®, the pioneering troubleshooting tool that uses power-off signature analysis to identify component failures on printed circuit boards.

Today, Huntron's reputation in providing automated power-off diagnostics results in instrumentation and software for test, inspection and repair of electronic printed circuit assemblies.
As density and complexity increase, printed circuit assemblies become tougher to probe and test. Huntrom complements conventional test equipment with access and test tools that catch the elusive problems other test methods often miss. The keys are physical and virtual access, which translates into meaningful results such as shorther design cycles, improved production yield and lower warranty costs. When you need to test, diagnose or troubleshoot complex circuit boards, Huntron lets you access, explore and discover more.
Contact us for more information on how we can help solve your test and troubleshooting needs

KYC

Know Your Customer (KYC) compliance regulation has proved to be
one of the biggest operational challenges banks, accountants, lawyers and
similar financial service providers worldwide have had to
overcome.

World-Check, the industry standard KYC compliance solution,
provides an overview of KYC compliance and its origins, and outlines the
compliance mandate as applicable to banks, accounting firms, lawyers and other
regulated financial service providers – not just in the UK, Europe and the USA,
but all around the world. Relied upon by more than 3,000 institutions worldwide,
this KYC database solution provides effective legal and reputational risk
reduction.

Why “Know Your Customer?”


The 9/11 terrorist
attacks on the World Trade Centre revealed that there were sinister forces at
work around the world, and that terrorists activities were being funded with
laundered money, the proceeds of illicit activities such as narcotics and human
trafficking, fraud and organised crime. Overnight, the combating of terrorist
financing became a priority on the international agenda.

For the
financial services provider of the 21st century, “knowing your customers” was no
longer a suggested course of action. Based on the requirements of legislative
landmarks such as the USA PATRIOT Act 2002, modern Know Your Customer (KYC)
compliance mandates were created to simultaneously combat money laundering and
the funding of terrorist activities.

What is Know Your Customer
(KYC)?


Know Your Customer, or KYC, refers to the regulatory
compliance mandate imposed on financial service providers to implement a
Customer Identification Programme and perform due diligence checks before doing
business with a person or entity.

KYC fulfils a risk mitigation function,
and one its key requirements is checking that a prospective customer is not
listed on any government lists for wanted money launders, known fraudsters or
terrorists.

If preliminary KYC checks reveal that the person is a
Politically Exposed Person (PEP), for example, Advanced Due Diligence must be
done in order to ensure that the person’s source of wealth is transparent, and
that he or she does not pose a reputational or financial risk in terms of their
finances, public positions or associations. Beyond customer identification
checks, the ongoing monitoring of transfers and financial transactions against a
range of risk variables forms an integral part of the KYC compliance
mandate.

But to understand the importance of KYC compliance for financial
service providers better, its origins need to be examined.

Origins of
Know Your Customer (KYC) compliance


The arrival of the new millennium
was marred by a spate of terrorist attacks and corporate scandals that unmasked
the darker features of globalisation. These events highlighted the role of money
laundering in cross-border crime and terrorism, and underlined the need to clamp
down on the exploitation of financial systems worldwide.

Know Your
Customer (KYC) legislation was principally not absent prior to 9/11. Regulated
financial service providers for a long time have been required to conduct due
diligence and customer identification checks in order to mitigate their own
operation risks, and to ensure a consistent and acceptable level of
service.

In essence, the USA PATRIOT Act was not so much a radical
departure from prior legislation as it was a firmer and more extensive
articulation of existing laws. The Act would lead to the more rigorous
regulation of a greater range of financial services providers, and expanded the
authority of American law enforcement agencies in the fighting of terrorism,
both in the USA and abroad.

In October 2001, President George W. Bush
signed off the USA PATRIOT Act, effectively providing federal regulators with a
new range of tools and powers for fighting terror financing and money
laundering. During July 2002, the US Treasury proceeded to introduce Section 326
of the PATRIOT Act, a clause that removed some key burdens for regulators and
added significant enforcement muscle to the Act.

What 9/11 changed, in
essence, was the extent to which existing legislation was being implemented.
Using the provisions of the earlier anti-terrorism USA Act as a foundation, it
included the Financial Anti-Terrorism Act, which allowed for federal
jurisdiction over foreign money launders and money laundered through foreign
banks. Significantly, it is this anti-terror law that would make the creation of
an Anti Money Laundering (AML) programme compulsory for all financial
institutions and service providers.

Section 326 of the USA PATRIOT Act
dealt specifically with the identification of new customers (“CIP regulation”),
and made extensive provisions in terms of KYC and the methods employed to verify
client identities.

In accordance with this piece of updated KYC
legislation, federal regulators would hold financial institutions accountable
for the effectiveness of their initial customer identification and ongoing KYC
screening. Institutions are required to keep detailed records of the steps that
were taken to verify prospective clients’ identities.

Although current
KYC legislation does not yet demand the exclusion of specific types of
foreign-issued identification, it recommends the usage of machine-verifiable
identity documents. The ability to notify financial institutions if concerns
regarding specific types of identification were to arise, combined with a
risk-based approach to KYC, proved to provide a robust mechanism for addressing
security concerns.

Effectively, the risk-based approach to customer due
diligence grants regulated institutions a certain degree of flexibility to
determine the forms of identification they will accept, and under which
conditions.

KYC compliance: Implications for banks, lawyers and
accounting firms


The KYC compliance mandate, for all its positive
outcomes, has burdened companies and organisations with a substantial
administrative obligation. Additionally, KYC compliance increasingly entails the
creation of auditable proof of due diligence activities, in addition to the need
for customer identification.

Add Scanning Capabilites to Your Huntron Tracker Model 30 System

Add Scanning Capabilites to Your Huntron Tracker Model 30 System
Adding
a Huntron® Scanner to your Tracker Model 30 system lets you access components
using standard DIP clips and cables, custom cables to PCB connectors or
interface to a bed-of-nails.You can compare one component with another in
real-time (64 pins max.) or use your PC to automate testing and scan up to 128
pins.Huntron Scanners can be used with a Huntron Access Prober to provide Common
line connections while the Prober is probing a PCB. This method gives you up to
128 selectable Commons to use. For example, you can connect the Scanner to a
connector on a PCB mounted in the Prober using a common ribbon style cable.
While the Prober is probing, any one of the lines on the connected ribbon cable
can be selected as the Common reference. This would provide you true
point-to-point testing capabilities.Note: The ProTrack Scanner will be replaced
by the Scanner II and/or the Scanner 31S effective 1/1/2008. This applies to
commercial sales only.Scanner II and Scaner 31S users may want to consider these
Optional Accessories to enhance their test
capabilities.
Highlights:Desing By kuzey....
The Scanner II and Scanner
31S accessories add scanning capability to the Tracker Model 30
All Scanners
have a minimum 64 pin capability
The Scanner II can scan up to 128 pins when
the A and B channels are combined
The Scanner 31S use standard IDC style
connectors
The Scanner II uses the common SCSI-2 (68 pin) style connectors
Up to 8 Scanner IIs can be “daisy-chained” to increase the available number
of test pins
Selecting Accessories for your Scanner IIThe Scanner II
accessories for interfacing to your printed circuit board come "ala carte". This
means that you select the accessories you want included with your Scanner.
Choose from SMT or through-hole style DIP clip and cable kits (Scanner Adapter
required with Scanner II) or a mutli-pin breakout cable. Details on these
accessories are provided on this page

High Flow Range Mass Coriolis

Ideal for the measurement of flow, density and temperature of liquids and slurries, such as aggressive or contaminated, sanitary or particle-filled fluids.

Features:

• Flow ranges from 60 to
  60K Kg/Hr (2.2 to 1650 lb/min)

• Accuracy up to 0.25% of reading

• Materials: flow tubes -
  316 L, splitter flanges -
  316 Ti, housing - cast iron

• Process temperature
  -40°F to 356°F

• Ambient temperature
  -40°F to 140°F

• Wide flow ranges

ACCURATE AND RELIABLE
This meter has the ability to
maintain high accuracy,
despite changing viscosity conditions, with accuracy of +0.25% of reading.

EASY CLEANING

The ACM series has smooth stainless steel tubes and no moving parts, and is therefore very easy to flush and clean.

MULTI-TASKING
The ACM series of mass coriolis flow meters measure flow, density and temperature.

MATERIAL COMPATIBILITY

Because of the meter's 316 stainless steel flow tubes, the ACM series can measure a wide range of materials.

VARIETY OF ELECTRONICS

Electronics available for the ACM series include a local, hazardous rated display and a remote, panel-mount digital display.

CDM ELECTRONİCKS

CDM Electronics is a certified small business, CCR# 42827, founded in 1993,
CDM Electronics' mission is to provide our customers with exceptional
interconnect products and value added services that meet or exceed our
customers' expectations. We welcome the chance to design a creative solution to
the most challenging issues.Our ProductsCDM Electronics is a NEDA Authorized
Supplier for electronic connectors, coaxial cables and other interconnect
products. This assures you that you are receiving factory new and approved
products. With today's ever changing business climate, particularly in light of
RoHS initiatives which transpired
in July 2006, it is imperative that your applications perform to specification
and in compliance with environmental and other government regulations. For those
applications not requiring RoHS compliance, there are still several performance
and reliability factors that are compromised when superior products are not
deployed. Choose CDM for all of your interconnect sourcing requirements and you
are guaranteed excellent products with on time deliveries.Our ServicesIn 1999,
CDM management recognized that customers wanted access to thousands of parts in
stock ready for same day shipment. But this only represented half of our
customers' needs. Sowe embarked upon a program to expand our offering into the
arena of cable assembly and value added programs. Since that time, CDM has
experienced explosive growth and now provides a host of value added services,
from "womb to tomb". We provide quick turn engineering and cable assembly
services for prime contractors, as well as 2nd and 3rd tier providers. Our
satisfied customer list includes Northrop Grumman, BAE, General Dynamics, and
all branches of the United States military: Army, Navy, Air Force and
Marines.CDM credits our great staff, especially our brilliant engineering team,
with our enormous success in this area.Proactive Cost Reduction Program™Process
improvement and cost-saving solutions are as important to us as they are to you.
Our "Proactive Cost Reduction Program" is a trademarked initiative created by
CDM Electronics to constantly create cost-saving solutions for our customers.Our
PeopleFrom Reception to Shipping, CDM Electronics is proud to have the most
loyal & dedicated employees. But it takes more than just our own employees
to make our company great. We rely heavily on the expertise of several of our
providers, especially our web designers:

ASC completes "Worlds Largest Autoclave"

Statistics

Inside working diameter: 30ft. (9.26M)
Ouside diameter: 32ft. (9.88M)
Inside working length: 76 ft. (23.5M)
Overall length: 112 ft. (34.5M)
Vessel volume: 82,000 cu.ft.
Max temperature: 450F
Max pressure: 150 psig
Heating system: 40 million BTU/hr
Control system: CPC Level III
Weight: over 1,000,000 lbs.
Man-hours to construct: 65,000+

Click for larger image

Interior view

Image shows length and rear-mounted cooling coil/radiator which stands 20ft (6.2M) tall.

Click for larger image